Follow Us On

LT: Ultra Lite

Back to List

We only use the best for our mallets and we feel the Fixcraft: LT and XT Shafts meet that standard. In addion, if you choose, we will cut the shaft to your desired length and file teeth into it. We'll even install the coupler system, if that is how you attach your head. All you should have to do is place your mallet head on the shaft and tighten the screw. Here is how we cut the shafts.


We cut from the tapered end up to a maximum of 7.75" (19.7cm). Then we take anything more from the non-tapered end down to meet your size. Keep in mind, if you use a coupler system, the maximum length for a LT shaft is 42.75" (108.6cm). If you use a longer length, you will need to use a different attachment system. Two examples of a long and a short shaft are as follows:


• Long - Say 47" (119.4cm) = Cut 2.5" (6.4cm) from the tapered end.

• Short - Say 38" (96.5cm) = Cut 7 3/4" (19.7cm) from the tapered end. Then cut 3.75" (9.5cm) from the non-tapered end.


"Fixcraft LT Shafts are made from 1.0 mm thick wall,  7075 T6 Series 4 aluminum and are extremely light and strong. The LT shaft is our original." -Fixcraft

All shafts come with a rubber end cap. Free coupler hardware is OPTIONAL.

• 1.0 mm wall thickness.
• accepts coupler nut attachment system or can be tapped for direct attachment.
• Total Length 48.75"
• Length of taper 11.75"
• Length of straight section 37"
• End of taper diameter 0.35"
• End of straight section diameter 0.71"
• Total weight before cutting down 6.2oz

Related Products
$15.00 - $20.00
There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Log in to submit a review
Add Review

(Your browser will be redirected back to this page)